//=============================================================================
// 2005/03/
RAIDCare 2.3.1 release note

RAIDCare Server :
   	1. Add SMTP Server Logon Authentication Function.
   	2. Add RAIDCare Server Version on command mode.
	
RAICare Client :
        1. Modify 'AlarmMailPanel.java' for SMTP Server Logon Authentication Function.
        2. Modify search style for network port.(Boradcast Address: 255.255.255.255 instead of xxx.xxx.xxx.255)
		
Network port server :	
	1. Add SMTP Server Logon Authentication Function.
	2. Add alarm function when client want to get information about page one.	
	
Network web port server :	
	1. Modify 'AlarmMailSettings.java' for SMTP Server Logon Authentication Function.
	2. Add 'Logout Server' function.
	3. Show the web server version on UserLoginPage, ServerInfoPage,and MointorPage.
	   Then, remove the web server version on top page.
	4. Modify ServerInfoPage for add some information about web server version, and 
	   device number.

WebAssistant:
	1. Modify search style for network port.(Boradcast Address: 255.255.255.255 instead of xxx.xxx.xxx.255)
	2. Show the Hotkey information on status bar.
	   a. Ctrl+c: clear selection
	   b. Ctrl+t: telnet function
	   c. Ctrl+a: assign ip function
	3. Modify advance function.		

//=============================================================================
// 2005/02/
RAIDCare 2.3.0 release note

RAIDCare Server :	
	
RAICare Client :
    1. Support Platform: 
		Linux: RedHat, and Fedora Code 3.0
		Solaris: 5.8, 5.9, 5.10
		Windows: 2000 serials, XP serials, 2003 serials
	2. add new feature commands
		Disk Utility --> 16bit CDB
	3. Modify search raid system function
	4. Modify serach network port function
	5. Modify assign ip address function   	    
		
Network port server :	
	1. To judge raid system status, then get data is need.	
	
Network web port server :	
	1. add warning page after user-login page(if raid system is initating or server is in using status) 
	2. add new feature commands
		Disk Utility --> 16bit CDB
	3. jdk1.4.2 build version

WebAssistant:
	1. Support Platform: 
		Linux: RedHat, and Fedora Code 3.0
		Solaris: 5.8, 5.9, 5.10
		Windows: 2000 serials, XP serials, 2003 serials
	2. Modify serach network port function
	3. add one stauts -> raid system is initating
	4. add assign ip function on toolbar
	5. add telnet function use 'Ctrl+t' 
	6. Modify advance function to add the web firmware version		

//=============================================================================
// 2004/11/
RAIDCare 2.2.0 release note
NOT BACKWARD COMPATIBLE FOR OLDER VERSION.

RAIDCare Server :
	1. add new features commands(clone, scrubbing, RTC....)
	2. download ROM feature on windoes platform
	
RAICare Client :
	1. add new feature commands
		RTC setting
		Clone & SMART
		Disk Utility
		Scrubbing configure
		Download ROM (only for host server on windows paltform)
	
RAIDCare Web Server	
	1. add new feature commands
		RTC setting
		Clone & SMART
		Disk Utility
		Scrubbing configure
		
Network port server :	
	1. add new features commands
	2. file extension "rom1" of the Network port ROM firmware is for Network Port Hardware Veraion 00-01, 
while "rom2" is for Network Port Hardware Veraion 00-03.
	
Network web port server :	
	1. add new features commands
		RTC setting
		Clone & SMART
		Disk Utility
		Scrubbing configure
	
//=============================================================================
// 2004/08/17
RAIDCare 2.1.0 release note

RAIDCare Server :
	

RAIDCare Client :
	1. fix assign IP for network port can't work on unix-like system

RAIDCare Web Server :
	1. new feature for web server, you can seach each IP address on the LAN
		and you can monitor multiple sub-system.
	2. more firendly UI and more easy to using.

Network port server :
	1. clear network buffer when network connection closed.

Network port web server :
	1. add the version info. on main page

//=============================================================================
// 2004/06/02
RAIDCare 2.0.2 release note

RAIDCare Server :
	1. Initialization, rebuilding, checking and expanding finished will send out email
	2. Bad sector report & send out email

RAIDCare Client :
	1. fixed firmware version string on server page.
	2. Adding slice total size and remain size.
	3. fixed the restart time too short when the memory of controller was too large.

Network port :
	1. fixed error index of harddisk off-line
	2. fixed gateway infomation 
	3. fixed alert email account limited & eamil setting.
	4. Adding Network port Web server function
			You can controll RAID system direct by browser.
	5. fixed email account can't setting more than six.
	6. fixed email report the error disk number index
	7. fixed show out the string of gateway ip address 	
//=============================================================================
// 2004/04/06
// Lancelot Kao
RAIDCare 2.0.1 release note.

RAIDCare Server:
	1. Load Comport Library for Linux and Solaris.
	2. Modify some code in order to use on windows, linux, or solaris system. 

RAIDCare Client:
	1. Adding login & logout message in MsgArea
	2. Extending search tree node to server level
	3. Remove FC speed 4 G/b
	4. remove stripe size 1024 & 512
	5. Fixed 128 Lun mapping setting
	6. Adding product image DemonRAID 12 bays
	7. Fixed SAN Masking Panel
	8. Fixed RAID Params Generl Panel: component Enabled/Disabled 
	9. Fixed ToolBar: component visible/invisible status
	
NetWork port :
	1. Fixed cannot send out e-mail alert.

//=============================================================================
// 2004/03/15
// Lancelot Kao

RAIDCare 2.0 release note.
new feature :	
	1. Easy to use graphical interface.  
 	2. Smart Agent allow administrator monitor or configure different 
 			RAID system without re-login.  
 	3. Search Raid system on LAN Use this function to search all 
 			AXUS RAID subsystems that is connected to LAN  
 	4. Monitoring All Raid systems on the LAN area
 	5. Monitoring the entire networked disk array status.  
 	6. Configure any RAID subsystem that is connected to network. 
	7. support SAN masking functions with FC.
	
notice:
	If you have a network port device , you also need to update network 
	prot firmware to 2.0	
		
support machine types:
	BR-8000 R/D
	BR-8600 R/D
	BR-1200 R/D
	BR-1600 R/D
	
	PA-16
	PA-08
	PA-16P
	SA-16
support firmware version :
	BR-8000 serial 
		ACS 8910		1.22A	
		ACS 8930		1.08P			
 	BR-1200 serial 
		ACS 8910		2.22A	
		ACS 8930		2.08P			
	BR-1600 serial 
		ACS 8910		6.13A	
		ACS 8930		6.08P	

	PA-16 serial
		ACS 8930		6.08P
	PA-08 serial 
		ACS 8930		1.08P
	PA-16P serial
		ACS 8990 	6.03s
	SA-16 serial
		ACS 8960		6.03A	
		ACS 8990		6.03s
//=============================================================================
// 2003/10/13
// Lancelot Kao
/. correct FC Hard Loop ID function
//=============================================================================
// 2003/10/9  
// Lancelot Kao
1. add R50 and R30 features
2. removed disk mode &  disk channel when subsystems were serial ATA model
	disk mode ==> RaidParm pages
	disk channel ==> monitor pages
3. add the length of company info limited by 16 characters
	SYSTEM PARAMS > OTHER INFO > COMPANY INFO
4. add 8 characters limited to Raid system password
5. add color text on healty page when error happened
6. changed STRIP SIZE to SIRIPE SIZE
7. fixed problem about the e-mail can't send out when HDs off-line.
8. add on-line and rebuliding e-mail alarm
//=============================================================================